Why does the machine room need frameless fireproof glass partition

With the development of electronic informatization, the computer room, as the numerical control center of modern office, has an irreplaceable core position. Therefore, in the decoration or reconstruction of the computer room, there are more strict requirements for the design and construction of the partition wall of the computer room. The strict selection of fireproof glass partition is the primary choice for the glass partition of the computer room. Of course, According to the requirements of fire protection time limit, 90min fire-proof glass interval and 120min fire-proof glass interval are generally used.

1. The same fire compartment can be designed and constructed with 12mm thick single tempered glass, and the structure is generally made of square steel wrapped with 201 or 304 stainless steel.

2. Frameless fireproof glass 12mm thick single piece cesium potassium fireproof glass can be used in different fire compartments. (in addition, it should be noted that the fire-resistant glass conforming to the corresponding fire-resistant time shall be selected according to the requirements of the local fire department for the fire-resistant time of the partition wall.) in order to ensure that there is no inner column in the machine room, the machine room is often built with a long-span structure. Different equipment of the computer system has different requirements for the environment, which is convenient for air conditioning control, dust control, noise control and computer room management. Partition walls are often used to separate the large computer room space into smaller functional areas. The partition wall should be light and thin, but also sound insulation and heat insulation.

The doors and windows outside the machine room are mostly fireproof and anti-theft doors and windows, and the doors and windows inside the machine room are generally frameless large glass doors, which not only ensure the safety of the machine room, but also ensure the transparent and bright effect in the machine room. The thermal insulation glass is a special glass with the maximum solar transmittance and the minimum reflection coefficient, which is divided into low radiation glass and multi-functional coated glass. 80% of the visible light can enter the room and be absorbed by objects, and more than 90% of the long wave radiated by indoor objects can be retained in the city, thus greatly improving the utilization rate of energy. Together, it can selectively transfer solar energy and transfer most of the heat radiation energy into the room, which can play the effect of thermal insulation and energy saving in heating construction.

In addition, the two glasses have selectivity for the transmission of sunlight with different spectrum, can filter out ultraviolet rays, avoid the fading of indoor furniture, and works of art due to ultraviolet radiation, and can also absorb part of visible light to prevent glare.

For more news about frameless fireproof glass, please click: http://www.dgfaiee.com